Five Tips For The Maintenance And Maintenance Of Dehumidifying Dryer

Care and maintenance of Dehumidifying Dryer:

1. Dehumidifying and drying conveying 1-3 filters and drying filters must be cleaned once per shift.

2. When the machine is maintained and repaired, the current switch in the control box must be placed in the "OFF" position.

3. The material in the dehumidifying dryer can only be used by random molding machines (except in special cases).

4. When the conveying 2 (conveying 3) is in operation, it should be noted that the drying cylinder cutting valve is opened about half to prevent the remaining material in the conveying pipe from blocking the conveying pipe from affecting the feeding when the conveying 2 (conveying 3) is stopped.

5, the machine will produce high temperature during operation, please pay attention to prevent burns, wet hands are strictly prohibited to touch the operation panel, otherwise there will be an electric shock.

We also have Hopper Dryer available for you, contact us, you can find more product related information.

Inspection And Maintenance Of The Gravimetric Mixer Machine

The Gravimetric Mixer Machine is subject to inspection and maintenance issues after use:

1. Check if the mixer injector is blocked.

2. Check if the screen in the mixer oil filter tank is damaged.

3. It is necessary to adjust the angle of the nozzle of the mixer, and try not to let the oil spray onto the wallboard and the blades at both ends of the mixer.

4. Of course, the heating temperature of the grease is appropriately controlled to prevent the oil temperature from being too high to be sprayed into the material to generate oil mass.

5. Add the finished product inspection sieve after the process, and disperse and remove the mixed oil mass.

We also have Heavy Duty Granulator available for you, if you are interested in our products, you can contact us.

Installation Precautions Of Plastic Granulator Oil Pump

The cylinder must be installed in strict accordance with the technical requirements to be firm and reliable, and must not be loose. When installing a reciprocating cylinder, the following points should be achieved.

1. Plastic Granulator In the case of large stroke and high ambient temperature, the cylinder can only be fixed at one end, and the other end can be freely stretched to prevent thermal expansion and cause cylinder deformation.

2. The sealing ring of the plastic granulator cylinder should not be installed too tightly, especially the I; shaped seal ring. If it is too tight, the resistance of the piston rod will increase.

3. The center line of the cylinder should be concentric with the line of action of the load force to avoid causing a case force, otherwise the seal or piston is prone to wear.

4. The pin hole of the piston rod should be in the same direction as the pin hole of the earring. Otherwise, the cylinder will be subjected to the bending load with the trunnion as the fulcrum, resulting in wear and seizure.

5. Before the plastic granulator is installed, it is necessary to carefully inspect the processing quality of the shaft end, the hole lock, etc., chamfer and remove the burr, then wash it with kerosene or gasoline and blow dry.

6. Larger cylinders should be supported in the middle of the cylinder and piston rod to prevent downward bending due to their own weight.

7. The sliding surface of the mounting surface and the piston should be kept at a certain degree of parallelism and verticality.

We are also Powerful Plastic Crusher Exporter, contact us, you can find out more about the product.

Application Of Mixer Machine

The Gravimetric Mixer Machine is a machine that combines two or more materials evenly by mechanical force and gravity. Hybrid machines are widely used in various industrial production and daily life in pharmaceutical, food, chemical, agricultural, and construction industries.

The mixer can mix a variety of materials into a homogeneous mixture. For example, in the pharmaceutical industry, the ingredients of different ingredients are uniformly mixed together to form a compound; the contact surface area of the material can be increased to promote chemical reaction; and physical changes such as granularity can be accelerated. The solute is added to the solvent, and the dissolution and mixing can be accelerated by the action of the mixing machine.

Commonly used mixing machines are divided into gas and low viscosity liquid mixers, medium and high viscosity liquid and paste mixers, thermoplastic material mixers, powder and granular solid material mixers.

We also produce products such as Hopper Dryer, welcome to consult and order.

Why Is The Plastic Crusher Bearing Hot?

What should we do when the Plastic Crusher has a problem with the bearing heating? Why does the bearing heat up? So let's take a look at it. What are the causes of the heating of the bearings of plastic crusher?

(1) Insufficient grease, excessive grease, deterioration of grease, deterioration of the bearing, and then add 50% of the volume of the grease to the bearing.

(2) Bearing damage, it is necessary to replace the bearing in time.

(3) The upper cover is too tight, and the bolts should be adjusted.

We are experts in plastic machinery. Our products include Single Shaft Plastic Shredder, Mold Temperature Controller and other products. Contact us for more information about our products.

How To Maintain Plastic Color Mixer?

The main function of the plastic color mixing machine is to mix the color of the plastic, which can make the material mix and color and let the moisture reach the drying effect. Therefore, the plastic color mixing machine also has the industrial importance. Now let's teach you how to maintain the plastic color mixing machine.

1. Check; to maintain the machine, check this step can not be skipped and ignored, the machine should be checked regularly to eliminate the bad points, and the problem is solved immediately.

2, cleaning; every time you use the machine or when the machine is finished, you should take out the remaining logistics in the plastic color mixing machine, and then clean the residual pigment in the various parts of the machine, remember to clean the machine must be closed Turn off the power to avoid a safety accident.

3, placed; the machine must be disassembled and cautious, light hands and feet, pay attention to prevent the deformation of the mixing paddle in the plastic color mixing machine or even damage.

4. Familiarity; managers or employees must be familiar with the operation of the plastic color mixing machine, internal structure, control structure, etc., to prevent damage to the machine caused by improper operation, and serious damage to health.

Our products include Dehumidifying Dryer, Mold Temperature Controller, Plastic Color Mixer, etc. Contact us for more information about the product.

Plastic Process Equipment

Plastic Process Equipment

PRODUCT NAME:

Central Plastic Granulator Crusher

Introduction

AMG-G Series Optimized European Type Central Plastic Granulators and Plastic Crushers are used for recycling of different type plastic wastes, injection mold sprues, and defective products during injection molding and blowing molding production.  Aumax AMG-G Series plastic crusher machine can crush different hard and soft plastic material such as PET, PP, HDPE, LDPE, PA (nylon)+ glass fiber, ABS, PVC, PPS, PMMA and so on. AMG-G plastic granulators play an important role in plastic recycling industry.  

Advantages

AMG-G Series plastic granulator is equipped with SKD11 material blades and high efficiency energy-saving motor.

The cutting (crushing) room can be opened completely; it’s easy to change blades and clean machine.

AMG-G Series plastic grinding machine equipped with electric motor + screw system to open the inlet hopper and cutting (crushing) room to save man power.

We have 3 different types of blades structure (V-shape type, Claw type and Flat type) for all kinds of plastic materials with different shapes and thickness.

With special design on machine structure, AMG Series plastic crushers have bigger cutting room with higher crushing capacity than similar models from other manufacturers.

AMG-G Series plastic crushers (grinders) adopt global top brand electrical parts to insure safety of peoples and machine, as well as reduce the problem of machines.

Main functions

AMG-G Series plastic crushers are used to crush plastic wastes, defective plastic products, injection mold sprues, blowing mold sprues, PET bottles, thermoforming sheets, etc. to be small pellets, granules and scraps material. In that case, the wasted plastics can be easily melted and reused again.

https://www.aumax-plast.com/plastic-process-equipment/