Do You Know Central Granulator?

For processing heavy extruded purgings, pipe, sheet garbage, X-ray movie, post customer bailed bottles, fibers and film, look no farther than Central Plastic Granulator. These components are designed to survive, and are designed to handle a range of materials like big injection molded components, blow molded components, automotive moldings, lighting purgings, furniture and appliance components. Simply to list a couple. With a number of different series to pick from, every Central Granulator supplies a huge array of attributes, throughput, knife configurations, room designs, etc.. The 3200 Series, by way of instance, processes around some staggering 12,000 pounds. Each hour. Heavy-duty construction guarantees these fundamental granulators will endure for ages. 

Aumax Industrial is recognized China as a leader in the data destruction industry with Plastic Shredder and disintegrators/granulators.

How Does Air Cooled Water Chiller Work?

Air Cooled Water Chiller actively absorb heat from process water; then they move this heat to the air across the chiller unit. This sort of device is typically utilized in places where extra heat release isn't a problem, but rather works as a benefit. As an example, the extra heat may be used to heat an area throughout the winter for significantly less money than conventional heating methods.

The cycle begins with the evaporator, which has a liquid preservative which flows across the evaporator tube package where it disappears. The compressor brings the refrigerant vapor from the evaporator. The compressor is subsequently tasked with pumping the refrigerant vapor into the condenser, which raises pressure and temperature. The refrigerant condenses if it is from the condenser tubes, discharging its inner heat to the heating or heating water. The high pressure liquid then moves through the expansion apparatus and to the evaporator; at the procedure that the effluent pressure is decreased together with the temperature. To finish the constant cycle, the refrigerant flows back across the chilled water coils also absorbs more heat. This is the work principle of Air-cooled Industrial Water Chiller.

Ways To Increase The Life Of Gravimetric Blender

The Gravimetric Blender brings great convenience to our production and life. How to maintain Gravimetric Blender to improve the life of Gravimetric Blender?

1. After work and when the machine is not in use, the power should be cut off and the switch box should be locked to ensure safety.

2. After starting the machine, always pay attention to whether the operation of the components of the gravimetric blender is normal. When shutting down, always check if the mixer blades are bent and the screws are knocked down or loose.

3, Gravimetric blender should be set in a flat position, with the front and rear axles, so that the tires are overhead, so as not to move around when starting.

4. Check whether the transmission clutch and brake are flexible and reliable, whether the wire rope is damaged, whether the track pulley is good, the surrounding is unobstructed and the lubrication of each part.

5, Gravimetric blender should implement secondary leakage protection, must be carefully checked after the power is turned on before going to work, and can only be used after passing the empty car test. During the test run, check that the mixing drum speed is appropriate.

6. Gravimetric blender must clean the internal plastic every time you change plastics of different nature.

7. The direction of rotation of the Gravimetric blender should conform to the direction indicated by the arrow. If it is not true, the motor wiring should be corrected.

We are Gravimetric Blender Manufacturer, we can help you solve any problems with Gravimetric blender, if you are interested in our products, you can contact us.

Six features Of Plastic Color Mixer

The six advantages of Plastic Color Mixer:

1. Integrate temperature and time control to facilitate the setting of various parameters.

2. Reasonable structure and easy operation.

3. Stainless steel liner, shell, easy to clean.

4. Double insulation device.

5. Stirring in the sealed chamber allows separation of magnetized impurities (optional).

6. Overload protection.

The equipment of the plastic color mixing machine does not have much problem in general. When we buy, we don't have to worry too much. We also have Powerful Plastic Crusher to provide you with quality assurance and price concessions.

Plastic Granulator Realizes The Recycling Of Waste Plastics

Plastic products provide a lot of convenience for our production and life. This is the good side. On the other hand, it is one of the biggest sources of pollution in our lives. It is not naturally degraded, and the appearance of Plastic Granulator is well solved. This pollution has realized the recycling of waste plastics.

After the plastic is added to the hopper, the hopper falls smoothly onto the screw and is bitten by the screw thread. As the screw rotates, the thread is forced to advance toward the head to form a mechanical conveying process. When the plastic is running from the feeding port to the machine head, the thread depth of the screw is gradually reduced, and due to the resistance of the filter screen, the manifold and the head, a high pressure is formed during the plasticizing process, and the material is pressed very much. Densification improves its conduction heat and helps the plastic melt quickly. At the same time, the gradually increasing pressure causes the gas originally present between the pellets to be discharged from the vent hole.

While the pressure is rising, the plastic is heated on the one hand by the outside. On the other hand, during the movement of compression, shearing and agitation, the plastic itself generates a large amount of heat due to internal friction. Under the combined action of external force and internal force, the plastic The temperature gradually increases, and its physical state also undergoes a change in the glass state, a high elastic state, and a viscous flow state.

Generally speaking, in the feeding, the glass state is mainly in the middle portion of the compression section where the screw thread is gradually reduced, the material is mainly in a high elastic state, and gradually melts, and the material is in a viscous state at the rear and the squashing section of the compression section. This is that the plastic has been completely plasticized, and the plasticized plastic is pressed, quantitatively and uniformly continuously extruded from the machine head by screw inference.

We also have Screenless Granulator available for you, contact us to find out more about the product.

Five Tips For The Maintenance And Maintenance Of Dehumidifying Dryer

Care and maintenance of Dehumidifying Dryer:

1. Dehumidifying and drying conveying 1-3 filters and drying filters must be cleaned once per shift.

2. When the machine is maintained and repaired, the current switch in the control box must be placed in the "OFF" position.

3. The material in the dehumidifying dryer can only be used by random molding machines (except in special cases).

4. When the conveying 2 (conveying 3) is in operation, it should be noted that the drying cylinder cutting valve is opened about half to prevent the remaining material in the conveying pipe from blocking the conveying pipe from affecting the feeding when the conveying 2 (conveying 3) is stopped.

5, the machine will produce high temperature during operation, please pay attention to prevent burns, wet hands are strictly prohibited to touch the operation panel, otherwise there will be an electric shock.

We also have Hopper Dryer available for you, contact us, you can find more product related information.

Inspection And Maintenance Of The Gravimetric Mixer Machine

The Gravimetric Mixer Machine is subject to inspection and maintenance issues after use:

1. Check if the mixer injector is blocked.

2. Check if the screen in the mixer oil filter tank is damaged.

3. It is necessary to adjust the angle of the nozzle of the mixer, and try not to let the oil spray onto the wallboard and the blades at both ends of the mixer.

4. Of course, the heating temperature of the grease is appropriately controlled to prevent the oil temperature from being too high to be sprayed into the material to generate oil mass.

5. Add the finished product inspection sieve after the process, and disperse and remove the mixed oil mass.

We also have Heavy Duty Granulator available for you, if you are interested in our products, you can contact us.